MC9S08DZ60MLF Datasheet, PDF (244/416 Pages) Freescale Semiconductor, Inc – MC9S08DZ60 Series Features

Chapter 12 Freescale’s Controller Area Network (S08MSCANV1)
Section 12.3.10, “MSCAN Transmit Buffer Selection Register (CANTBSEL)”). For receive buffers, only
when RXF flag is set (see Section 12.3.4.1, “MSCAN Receiver Flag Register (CANRFLG)”).
Write: For transmit buffers, anytime when TXEx flag is set (see Section 12.3.6, “MSCAN Transmitter Flag
Register (CANTFLG)”) and the corresponding transmit buffer is selected in CANTBSEL (see
Section 12.3.10, “MSCAN Transmit Buffer Selection Register (CANTBSEL)”). Unimplemented for
receive buffers.
Reset: Undefined (0x00XX) because of RAM-based implementation
Register
Name
Bit 7
6
5
4
3
2
1
Bit 0
R
IDR0
ID10
ID9
ID8
ID7
ID6
ID5
ID4
ID3
W
IDR1
R
ID2
ID1
ID0
RTR¹
IDE²
W
R
IDR2
W
R
IDR3
W
= Unused, always read ‘x’
Figure 12-24. Receive/Transmit Message Buffer — Standard Identifier Mapping
1 _{The position of RTR differs between extended and standard indentifier mapping.}
2 _{IDE is 0.}
12.4.1 Identifier Registers (IDR0–IDR3)
The identifier registers for an extended format identifier consist of a total of 32 bits; ID[28:0], SRR, IDE,
and RTR bits. The identifier registers for a standard format identifier consist of a total of 13 bits; ID[10:0],
RTR, and IDE bits.
12.4.1.1 IDR0–IDR3 for Extended Identifier Mapping
R
W
Reset:
7
ID28
6
ID27
5
ID26
4
ID25
3
ID24
2
ID23
1
ID22
x
x
x
x
x
x
x
Figure 12-25. Identifier Register 0 (IDR0) — Extended Identifier Mapping
0
ID21
x
MC9S08DZ60 Series Data Sheet, Rev. 4
244
Freescale Semiconductor