3UG4622-1AW30 Datasheet, PDF (50/114 Pages) List of Unclassifed Manufacturers – Monitoring and Control Devices

3RP, 7PV Timing Relays
3RP15 timing relays in industrial enclosure,
22.5 mm
■ Technical specifications
Type
Rated insulation voltage
Pollution degree 3
Overvoltage category III
Operating range at excitation¹⁾
Rated power
• Power consumption at 230 V AC, 50 Hz
Rated operational current I_e
• AC-14, DC-13
• AC-15 at 230V, 50 Hz
• DC-13 at
- 24 V
- 48 V
- 60 V
- 110 V
- 230 V
DIAZED fuse⁴⁾
gL/gG operational class
Switching frequency
• When loaded with I_e 230 V AC
• When loaded with 3RT10 16 contactor, 230 V AC
Recovery time
Minimum ON period
Residual current
with non-conducting output
Voltage drop
with conducting output
Short-time loading capacity
Setting accuracy
with reference to scale value
Repeat accuracy
Mechanical endurance
Operating cycles
Permissible ambient temperature During operation
During storage
Degree of protection
acc. to EN 60529
Conductor cross-sections
• Screw-type connection (to connect Solid
1 or 2 conductors); for standard
screwdriver (size 2 and Pozidriv 2) Finely stranded with end sleeve
AWG conductors, solid or stranded
Terminal screw
Tightening torque
V AC
W
VA
A
A
A
A
A
A
A
A
1/h
1/h
ms
ms
mA
VA
°C
°C
mm²
mm²
AWG
Nm
3RP15 05
3RP15 31
3RP15 32
3RP15 33
3RP15 11
3RP15 12
3RP15 13
3RP15 25
3RP15 55
3RP15 40
300; 500 for 3RP15 05-1BT10
3RP15 60
3RP15 74
3RP15 76
3RP15 27
0.85 ... 1.1 x U_s with AC; 0.8 ... 1.25 x U_s with DC;
0.95 ... 1.05 times rated frequency
2
6
2²⁾
6
--
3³⁾
1
0.45
0.35
0.2
0.1
4
1
1
0.01 … 0.6
--
--
--
--
--
--
--
2500
5000
150
35⁵⁾
--
--
--
--
Typical –5 %
ˆ –1%
30 x 10⁶
-25 … +60
-40 … +85
IP40 cover,
IP20 terminals
1 x (0.5 ... 4)
2 x (0.5 ... 2.5)
1 x (0.5 ... 2.5)
2 x (0.5 ... 1.5)
2 x (20 ... 14)
M 3.5
0.8 … 1.2
5000
300
150
50
200⁶⁾
--
5
3.5
10
(to 10 ms)
100 x 10⁶
• Spring-loaded terminal
(to connect 1 or 2 conductors; for
22.5 mm timing relay use
screwdriver with 3 mm blade or
8WA2 807 opening tool)
Solid
Finely stranded
• With end sleeve
• Without end sleeve
AWG conductors, solid or stranded
Permissible
Shock resistance acc. to IEC 60068 for half-sine shock type
Vibration resistance acc. to IEC 60068-2-6
Electromagnetic compatibility (EMC)
Tests acc. to basic specification
1) If nothing else is stated.
2) Maximum inrush current 1A/100 ms.
3) For 3RP15 05-.R: NC contact -> I_e = 1 A.
4) I_k ˜ 1 kA weld-free acc. to IEC 60947-5-1
5) Minimum ON period with 3RP15 05-.BW30, 150 ms, until instantaneous
contact has switched.
6) For correct operation, observe minimum ON period.
mm² 2 x (0.25 ... 1.5)
mm² 2 x (0.25 ... 1)
mm² 2 x (0.25 ... 1.5)
AWG 2 x (24 ... 16)
Any
g/ms 15/11
Hz/mm 10 ... 55/0.35
EN 61000-6-2/EN 61000-6-4
7/50
Siemens LV 1 T · 2006