MC9328MXS Datasheet, PDF (11/72 Pages) List of Unclassifed Manufacturers – Advance Information

Table 6. Maximum and Minimum DC Characteristics (Continued)
Number or
Symbol
Parameter
Min
Typical
I_IH
Input high leakage current
(V_IN = V_DD, no pull-up or pull-down)
I_OH
Output high current
(V_OH = 0.8V_DD, V_DD = 1.8V)
I_OL
Output low current
(V_OL = 0.4V, V_DD = 1.8V)
I_OZ
Output leakage current
(V_out = V_DD, output is high impedence)
C_i
Input capacitance
C_o
Output capacitance
–
–
–
–
-4.0
–
–
–
–
–
–
–
Specifications
Max Unit
±1
µA
4.0
mA
–
mA
±5
µA
5
pF
5
pF
3.5 AC Electrical Characteristics
The AC characteristics consist of output delays, input setup and hold times, and signal skew times. All signals are
specified relative to an appropriate edge of other signals. All timing specifications are specified at a system
operating frequency from 0 MHz to 96 MHz (core operating frequency 100 MHz) with an operating supply voltage
from V_{DD min} to V_{DD max} under an operating temperature from T_L to T_H. All timing is measured at 30 pF loading.
Table 7. Tristate Signal Timing
Pin
Parameter
Minimum Maximum Unit
TRISTATE Time from TRISTATE activate until I/O becomes Hi-Z
–
20.8
ns
Table 8. 32k/16M Oscillator Signal Timing
Parameter
Minimum
RMS
EXTAL32k input jitter (peak to peak)
–
5
EXTAL32k startup time
EXTAL16M input jitter (peak to peak) ¹
EXTAL16M startup time ¹
800
–
–
TBD
TBD
–
1. The 16 MHz oscillator is not recommended for use in new designs.
Maximum Unit
20
ns
–
ms
TBD
–
–
–
MC9328MXS Advance Information, Rev. 0
Freescale Semiconductor
11