BCM4339XKWBGT Datasheet, PDF (131/183 Pages) Cypress Semiconductor – Single-Chip 5G WiFi IEEE 802.11ac MAC/Baseband/Radio with Integrated Bluetooth 4.1 and FM Receiver

BCM4339 Preliminary Data Sheet
Bluetooth RF Specifications
Table 34: Bluetooth Receiver RF Specifications (Cont.)
Parameter
Conditions
Minimum Typical Maximum Unit
Spurious Emissions
30 MHz–1 GHz
–
–95
–62
dBm
1–12.75 GHz
851–894 MHz
925–960 MHz
–
–70
–47
dBm
–
–147
–
dBm/Hz
–
–147
–
dBm/Hz
1805–1880 MHz
1930–1990 MHz
2110–2170 MHz
–
–147
–
dBm/Hz
–
–147
–
dBm/Hz
–
–147
–
dBm/Hz
a. The maximum value represents the actual Bluetooth specification required for Bluetooth qualification as defined
in the version 4.1 specification.
b. Bluetooth reference level is taken at the 3 dB RX desense on each of the modulation schemes.
c. Interferer: 2380 MHz, BW=10 MHz; measured at 2480 MHz.
d. Interferer: 2355 MHz, BW=10 MHz; measured at 2480 MHz.
e. Interferer: 2560 MHz, BW=10 MHz; measured at 2480 MHz.
f. Interferer: 2360 MHz, BW=10 MHz; measured at 2402 MHz.
Table 35: Bluetooth Transmitter RF Specifications
Parameter
Conditions
Minimum Typical Maximum Unit
Note: The specifications in this table are measured at the chip port output unless otherwise specified.
General
Frequency range
Basic rate (GFSK) TX power at Bluetooth
QPSK TX Power at Bluetooth
8PSK TX Power at Bluetooth
Power control step
Note: Output power is with TCA and TSSI enabled.
2402
11.0
8.0
8.0
2
–
2480
13.0 –
10.0 –
10.0 –
4
8
MHz
dBm
dBm
dBm
dB
GFSK In-Band Spurious Emissions
–20 dBc BW
–
–
0.93 1
MHz
EDR In-Band Spurious Emissions
1.0 MHz < |M – N| < 1.5 MHz
1.5 MHz < |M – N| < 2.5 MHz
|M – N|  2.5 MHz^a
M – N = the frequency range for –
which the spurious emission is
measured relative to the
–
transmit center frequency.
–
–38 –26.0
–31 –20.0
–43 –40.0
dBc
dBm
dBm
Broadcom^®
November 17, 2014 • 4339-DS106-R
Page 130