AK4683_07 Datasheet, PDF (9/84 Pages) Asahi Kasei Microsystems – Asynchronous Multi-Channel Audio CODEC with DIR/T

[AK4683]
Analog Volume Characteristics (OPGA):
Step Size:
+0dB ∼ -16dB
0.1
-16dB ∼ -38dB
0.1
-38dB ∼ -50dB
-
Headphone-Amp Characteristics: DAC → HPL/HPR pins, RL=16Ω
Output Voltage
(0.506xHVDD)
1.94
S/(N+D)
(−3dBFS)
-
S/N
(A-weighted)
-
Interchannel Isolation
-
Interchannel Gain Mismatch
-
Load Resistance
16
Load Capacitance
C1 in Figure 1
C2 in Figure 1
-
-
Power Supplies
Power Supply Current
Normal Operation (PDN pin = “H”)
AVDD1+ AVDD2 fs=48kHz, fs=96kHz
fs=192kHz
HVDD
PVDD
DVDD+TVDD
fs=48kHz
fs=96kHz
fs=192kHz
Power-down mode (PDN pin = “L”)
(Note 11)
(Note 12)
(Note 13)
1
-
dB
2
-
dB
4
-
dB
2.43
2.92
Vpp
70
-
dBFS
90
-
dB
80
-
dB
0.1
0.5
dB
-
-
Ω
-
30
pF
-
300
pF
37
52
mA
19
27
mA
7
10
mA
8
11
mA
35
49
mA
45
63
mA
55
77
mA
80
200
μA
Note 5. Measured at LISEL/RISEL pins when the input resistor=47kohm, the feedback resistor=24kohm and input level
=2Vrms.
Note 6. Measured through Pre-Amp -> ADC. Input resistor=47kohm, feedback resistor=24kohm.
Note 7. S/N measured by CCIR-ARM is 96dB(@fs=48kHz).
Note 8. This value is the interchannel isolation between all the channels of the LIN1-6 and RIN1-6.
Note 9. PSR is applied to AVDD, DVDD, PVDD and TVDD with 1kHz, 50mVpp.
Note 10. S/N measured by CCIR-ARM is 102dB(@fs=48kHz).
Note 11. C_L=20pF, X'tal=24.576MHz, CM1-0=“10”, CM1-0=“10”, OCKS1-0="10"@48kHz,"00"@96kHz,
"11"@192kHz. Headphone = No output. The resister network is attached to TX pin.
Note 12. TVDD=6mA(typ@fs=48kHz), 7mA(typ@fs=96kHz), 10mA(typ@fs=192kHz).
Note 13. In the power-down mode. RX0 input is open and all digital input pins including clock pins (MCLK2, BICKA,
BICKB, ILRCKA, OLRCKA, BICKB pins) and RX1-3 pins are held DVSS
HP-Amp
HPL, HPR
-
+
+
C1
C2
16Ω
Figure 1. Headphone Amplifier output circuit
MS0427-E-02
-9-
2007/04