Z8F1601 Datasheet, PDF (62/246 Pages) Zilog, Inc. – Z8 Encore Microcontrollers with Flash Memory and 10-Bit A/D Converter

Z8F640x/Z8F480x/Z8F320x/Z8F240x/Z8F160x
Z8 Encore!^®
44
Interrupt Controller
Overview
The interrupt controller on the Z8F640x family device prioritizes the interrupt requests
from the on-chip peripherals and the GPIO port pins. The features of the interrupt control-
ler on the Z8F640x family device include the following:
• 24 unique interrupt vectors:
– 12 GPIO port pin interrupt sources
– 12 on-chip peripheral interrupt sources
• Flexible GPIO interrupts
– 8 selectable rising and falling edge GPIO interrupts
– 4 dual-edge interrupts
• 3 levels of individually programmable interrupt priority
• Watch-Dog Timer can be configured to generate an interrupt
Interrupt requests (IRQs) allow peripheral devices to suspend CPU operation in an orderly
manner and force the CPU to start an interrupt service routine (ISR). Usually this interrupt
service routine is involved with the exchange of data, status information, or control infor-
mation between the CPU and the interrupting peripheral. When the service routine is com-
pleted, the CPU returns to the operation from which it was interrupted.
The eZ8 CPU supports both vectored and polled interrupt handling. For polled interrupts,
the interrupt control has no effect on operation. Refer to the eZ8 CPU User Manual for
more information regarding interrupt servicing by the eZ8 CPU. The eZ8 CPU User Man-
ual is available for download at www.zilog.com.
Interrupt Vector Listing
Table 22 lists all of the interrupts available on the Z8F640x family device in order of pri-
ority. The interrupt vector is stored with the most significant byte (MSB) at the even Pro-
gram Memory address and the least significant byte (LSB) at the following odd Program
Memory address.
PS017610-0404
Interrupt Controller