Z8F1601 Datasheet, PDF (31/246 Pages) Zilog, Inc. – Z8 Encore Microcontrollers with Flash Memory and 10-Bit A/D Converter

Z8F640x/Z8F480x/Z8F320x/Z8F240x/Z8F160x
Z8 Encore!^®
13
Signal Descriptions
Table 2 describes the Z8F640x family signals. Refer to the section Pin Configurations on
page 7 to determine the signals available for the specific package styles.
Table 2. Signal Descriptions
Signal Mnemonic
I/O Description
General-Purpose I/O Ports A-H
PA[7:0]
I/O Port A[7:0]. These pins are used for general-purpose I/O.
PB[7:0]
I/O Port B[7:0]. These pins are used for general-purpose I/O.
PC[7:0]
I/O Port C[7:0]. These pins are used for general-purpose I/O.
PD[7:0]
I/O Port D[7:0]. These pins are used for general-purpose I/O.
PE[7:0]
I/O Port E[7:0]. These pins are used for general-purpose I/O.
PF[7:0]
I/O Port F[7:0]. These pins are used for general-purpose I/O.
PG[7:0]
I/O Port G[7:0]. These pins are used for general-purpose I/O.
PH[3:0]
I/O Port H[3:0]. These pins are used for general-purpose I/O.
I²C Controller
SCL
SDA
O Serial Clock. This is the output clock for the I²C. This pin is multiplexed with a
general-purpose I/O pin. When the general-purpose I/O pin is configured for
alternate function to enable the SCL function, this pin is open-drain.
I/O Serial Data. This open-drain pin is used to transfer data between the I²C and a
slave. This pin is multiplexed with a general-purpose I/O pin. When the general-
purpose I/O pin is configured for alternate function to enable the SDA function,
this pin is open-drain.
SPI Controller
SS
SCK
MOSI
MISO
I/O Slave Select. This signal can be an output or an input. If the Z8 Encore! is the SPI
master, this pin may be configured as the Slave Select output. If the Z8 Encore! is
the SPI slave, this pin is the input slave select. It is multiplexed with a general-
purpose I/O pin.
I/O SPI Serial Clock. The SPI master supplies this pin. If the Z8 Encore! is the SPI
master, this pin is an output. If the Z8 Encore! is the SPI slave, this pin is an
input. It is multiplexed with a general-purpose I/O pin.
I/O Master Out Slave In. This signal is the data output from the SPI master device and
the data input to the SPI slave device. It is multiplexed with a general-purpose I/O
pin.
I/O Master In Slave Out. This pin is the data input to the SPI master device and the
data output from the SPI slave device. It is multiplexed with a general-purpose I/O
pin.
PS017610-0404
Signal and Pin Descriptions