W25Q256FVBIF-TR Datasheet, PDF (94/108 Pages) Winbond – 3V 256M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

W25Q256FV
9. ELECTRICAL CHARACTERISTICS
9.1 Absolute Maximum Ratings ⁽¹⁾⁽²⁾
PARAMETERS
Supply Voltage
Voltage Applied to Any Pin
Transient Voltage on any
Pin
Storage Temperature
Lead Temperature
Electrostatic Discharge
Voltage
SYMBOL
VCC
VIO
VIOT
TSTG
TLEAD ⁽³⁾
VESD⁽²⁾
CONDITIONS
Relative to Ground
<20nS Transient
Relative to Ground
Human Body
Model
RANGE
–0.6 to 4.6V
–0.6 to VCC+0.4
–2.0V to
VCC+2.0V
–65 to +150
See Note ⁽³⁾
–2000 to +2000
UNIT
V
V
V
°C
°C
V
Notes:
1.This device has been designed and tested for the specified operation ranges. Proper operation outside of these levels is not
guaranteed. Exposure to absolute maximum ratings may affect device reliability. Exposure beyond absolute maximum ratings may
cause permanent damage.
2.JEDEC Std JESD22-A114A (C1=100pF, R1=1500 ohms, R2=500 ohms).
3.Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly and the European directive on
restrictions on hazardous substances (RoHS) 2002/95/EU.
9.2 Operating Ranges
PARAMETER
Supply Voltage
Ambient
Temperature,
Operating
SYMB
OL
VCC ⁽¹⁾
TA
CONDITIONS
FR = 104MHz, fR = 50MHz
Industrial
SPEC
MIN
MA
X
2.7
3.6
–40 +85
UNIT
V
°C
Note:
1.VCC voltage during Read can operate across the min and max range but should not exceed ±10% of the programming
(erase/write) voltage.
- 93 -