W83627THF_06 Datasheet, PDF (78/142 Pages) Winbond – Winbond LPC I/O

W83627THF/W83627THG
7 6 5 4 32 1 0
AUXFANOUT Stop Time
When at Thermal Cruise mode, this register determines the time of which AUXFANOUT voltage is
from stop value to 0. The unit of this register is 0.1 second. The default time is 6 seconds.
5.8.82 VRM & OVT Configuration Register -- Index 18h (Bank 0)
Register Location:
18h
Power on Default Value
43h
Attribute:
Read/Write
Size:
8 bits
7 6 5 4 32 1 0
VCORE_AD_SEL
Reserved
Reserved
Reserved
OVT1_Mode
Reserved
DIS_OVT1
Reserved
Bit 7: Reserved.
Bit 6: Set to 1, disable temperature sensor SYSTIN over-temperature (OVT#) output. Set to 0, enable
the SYSTIN OVT# output.
Bit 5: Reserved.
Bit 4: SYSTIN OVT# mode select. This bit default is set to 0, which is compared mode. When set to 1,
interrupt mode will be selected.
Bit 3-1: Reserved.
Bit 0: CPUVCORE pin voltage detection method selection. Set to 1, VRM9 formula is selected. Set to
0, VRM8 formula is selected. This bit default value is 1.
- 71 -
Publication Release Date: September 26, 2006
Revision 1.2