W83627THF_06 Datasheet, PDF (65/142 Pages) Winbond – Winbond LPC I/O

W83627THF/W83627THG
Bit 2: VIN1 Voltage Status. Set 1, the voltage of VIN1 is over the limit value. Set 0, the voltage of
VIN1 is in the limit range.
Bit 1: VIN0 Voltage Status. Set 1, the voltage of VIN0 is over the limit value. Set 0, the voltage of
VIN0 is in the limit range.
Bit 0: VCORE Voltage Status. Set 1, the voltage of VCORE is over the limit value. Set 0, the
voltage of VCORE is in the limit range.
5.8.52 Real Time Hardware Status Register II -- Index 5Ah (Bank 4)
Register Location:
5Ah
Power on Default Value
Attribute:
Size:
00h
Read Only
8 bits
7 6 5 4 32 1 0
VIN2_STS
Reserved
Reserved
AUXFANIN_STS
CASE_STS
AUXTIN_STS
TAR1_STS
TAR2_STS
Bit 7: Smart CPUFANIN warning status. Set 1, the CPUTIN temperature has been over the target
temperature for 3 minutes with full fan speed at thermal cruise mode of SmartFan^TM. Set 0, the
temperature does not reach the warning range yet.
Bit 6: Smart SYSFANIN warning status. Set 1, the SYSTIN temperature has been over the target
temperature for 3 minutes with full fan speed at thermal cruise mode of SmartFan^TM. Set 0, the
temperature does not reach the warning range yet.
Bit 5: AUXTIN temperature sensor status. Set 1, the temperature exceeds the over-temperature limit
value. Set 0, the temperature is in under the hysteresis value.
Bit 4: Case Open Status. Set 1, the case open is detected and latched. Set 0, the case is not latched
open.
Bit 3: CPUFANIN Status. Set 1, the fan speed counter is over the limit value. Set 0, the fan speed
counter is in the limit range.
Bit 2-1: Reserved.
Bit 0: VIN2 Voltage Status. Set 1, the voltage of VIN2 is over the limit value. Set 0, the voltage of
VIN2 is in the limit range.
5.8.53 Real Time Hardware Status Register III -- Index 5Bh (Bank 4)
Register Location:
5Bh
Power on Default Value
00h
Attribute:
Read Only
Size:
8 bits
- 58 -