W83627THF_06 Datasheet, PDF (51/142 Pages) Winbond – Winbond LPC I/O

W83627THF/W83627THG
5.8.17 Winbond Vendor ID Register - Index 4Fh
Register Location:
4Fh
Power on Default Value
<15:0> = 5CA3h
Attribute:
Read Only
Size:
16 bits
15
87
0
VIDH
VIDL
Bit 15-8: Vendor ID High Byte if CR4E.bit7=1.Default 5Ch.
Bit 7-0: Vendor ID Low Byte if CR4E.bit7=0. Default A3h.
5.8.18 Winbond Test Register -- Index 50h - 55h (Bank 0)
5.8.19 BEEP Control Register 1-- Index 56h (Bank 0)
Register Location:
56h
Power on Default Value
00h
Attribute:
Read/Write
Size:
8 bits
7 65432 1 0
EN_VCORE_BP
EN_VIN0_BP
EN_VIN1_BP
EN_AVCC_BP
EN_SYSTIN_BP
EN_CPUTIN_BP
EN_SYSFANIN_BP
EN_CPUFANIN_BP
Bit 7: BEEP output control for CPUFANIN if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
Bit 6: BEEP output control for SYSFANIN if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
Bit 5: BEEP output control for temperature CPUTIN if the monitor value exceed the limit value. Write 1,
enable BEEP output. Write 0, disable BEEP output, which is default value.
Bit 4: BEEP output control for temperature SYSTIN if the monitor value exceed the limit value. Write 1,
enable BEEP output. Write 0, disable BEEP output, which is default value.
Bit 3: BEEP output control for AVCC(pin 114) if the monitor value exceed the limit value. Write 1,
enable BEEP output. Write 0, disable BEEP output, which is default value.
- 44 -