W83627THF_06 Datasheet, PDF (22/142 Pages) Winbond – Winbond LPC I/O

W83627THF/W83627THG
Hardware Monitor Interface, continued.
SYMBOL
PIN
I/O
SYSTIN
104 AIN
OVT#
111
OD₁₂
AUXFANIN
5
CPUFANIN
SYSFANIN
112
I/O_12ts
113
SYSFANOUT 116
CPUFANOUT 115 AOUT
AUXFANOUT 7
FUNCTION
Temperature sensor 1 input. It is used for system temperature
maturation.
Over temperature Shutdown Output. It indicated the
temperature is over temperature limit.
0V to +5V amplitude fan tachometer input.
Fan speed control. Output analog voltage level to control the
Fan's speed.
3.7 Game Port
SYMBOL PIN
GPSA1
128
GP10
GPSB1
127
GP11
GPX1
126
GP12
GPX2
GP13
125
GPY2
GP14
124
GPY1
123
GP15
GPSB2
GP16
122
GPSA2
GP17
121
I/O
IN_cs
I/OD_12cs
IN_cs
I/OD_12cs
I/OD_12cs
I/OD_12cs
I/OD_12cs
I/OD_12cs
I/OD_12cs
I/OD_12cs
I/OD_12cs
IN_cs
I/OD_12cs
IN_cs
I/OD_12cs
FUNCTION
Active-low, Joystick I switch input 1. (Default)
General purpose I/O port 1 bit 0.
Active-low, Joystick II switch input 1. (Default)
General purpose I/O port 1 bit 1.
Joystick I timer pin. this pin connects to X positioning variable
resistors for the Joystick. (Default)
General purpose I/O port 1 bit 2.
Joystick II timer pin. this pin connects to X positioning variable
resistors for the Joystick. (Default)
General purpose I/O port 1 bit 3.
Joystick II timer pin. this pin connects to Y positioning variable
resistors for the Joystick. (Default)
General purpose I/O port 1 bit 4.
Joystick I timer pin. this pin connects to Y positioning variable
resistors for the Joystick. (Default)
General purpose I/O port 1 bit 5.
Active-low, Joystick II switch input 2. This pin has an internal pull-
up resistor. (Default)
General purpose I/O port 1 bit 6.
Active-low, Joystick I switch input 2. This pin has an internal pull-
up resistor. (Default)
General purpose I/O port 1 bit 7.
3.8 General Purpose I/O Port
3.8.1 General Purpose I/O Port 1 (Power source is Vcc)
see 3.7 Game Port
- 15 -
Publication Release Date: September 26, 2006
Revision 1.2