W83627THF_06 Datasheet, PDF (43/142 Pages) Winbond – Winbond LPC I/O

W83627THF/W83627THG
5.8.3 Configuration Register ⎯ Index 40h
Register Location:
Power on Default Value
Attribute:
Size:
40h
03h
Read/write
8 bits
7 6 54321 0
START
SMI#Enable
Reserved
INT_Clear
Reserved
Reserved
Reserved
INITIALIZATION
Bit 7: A one restores power on default value to some registers. This bit clears itself since the power on
default is zero.
Bit 6: Reserved
Bit 5: Reserved
Bit 4: Reserved
Bit 3: A one disables the SMI# output without affecting the contents of Interrupt Status Registers.
The device will stop monitoring. It will resume upon clearing of this bit.
Bit 2: Reserved
Bit 1: A one enables the SMI# Interrupt output.
Bit 0: A one enables startup of monitoring operations, a zero puts the part in standby mode.
Note: The outputs of Interrupt pins will not be cleared if the user writes a zero to this location after an
interrupt has occurred unlike "INT_Clear'' bit.
- 36 -