W83627THF_06 Datasheet, PDF (48/142 Pages) Winbond – Winbond LPC I/O

W83627THF/W83627THG
5.8.11 Device ID Register - Index 49h
Register Location:
49h
Power on Default Value
03h
Attribute:
bit<7:1> Read Only; bit<0> Read/Write
Size:
8 bits
7 6 5 4 32 1 0
Reserved
DID<6:0>
Bit 7-1: Read Only - Device ID<6:0>
Bit 0 :Reserved.
5.8.12 Reserved Register ⎯ Index 4Ah
5.8.13 Fan Divisor Register II - Index 4Bh
Register Location:
4Bh
Power on Default Value
<7:0> 44h.
Attribute:
Read/Write
Size:
8 bits
7 6 5 4 32 1 0
Reserved
Reserved
Reserved
Reserved
ADCOVSEL
ADCOVSEL
AUXFANINDIV_B0
AUXFANINDIV_B1
Bit 7-6:AUXFANIN speed divisor.Please refer to Bank0 CR[5Dh] , Fan divisor table.
Bit 5-4: Select A/D Converter Clock Input.
<5:4> = 00 - default. ADC clock select 22.5 Khz.
<5:4> = 01- ADC clock select 5.6 Khz. (22.5K/4)
<5:4> = 10 - ADC clock select 1.4Khz. (22.5K/16)
<5:4> = 11 - ADC clock select 0.35 Khz. (22.5K/64)
Bit 3-2: These two bits should be set to 01h. The default value is 01h.
Bit 1-0: Reserved.
- 41 -
Publication Release Date: September 26, 2006
Revision 1.2