W83627THF_06 Datasheet, PDF (52/142 Pages) Winbond – Winbond LPC I/O

W83627THF/W83627THG
Bit 2: BEEP output control for VIN1 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 1: BEEP output control for VIN0 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 0: BEEP output control for CPUVCORE if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
5.8.20 BEEP Control Register 2-- Index 57h (Bank 0)
Register Location:
57h
Power on Default Value 80h
Attribute:
Read/Write
Size:
8 bits
7 6 5 4 32 1 0
EN_VIN2_BP
Reserved
Reserved
EN_AUXFANIN_BP
EN_CASO_BP
EN_AUXTIN_BP
Reserved
EN_GBP
Bit 7: Global BEEP Control. Write 1, enable global BEEP output. Default 1. Write 0, disable all BEEP
output.
Bit 6: Reserved.
Bit 5: BEEP output control for temperature AUXTIN if the monitor value exceed the limit value. Write 1,
enable BEEP output. Write 0, disable BEEP output, which is default value.
Bit 4: BEEP output control for case open if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
Bit 3: BEEP output control for AUXFANIN if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
Bit 2-1: Reserved.
Bit 0: BEEP output control for VIN1 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
- 45 -
Publication Release Date: September 26, 2006
Revision 1.2