W83627THF_06 Datasheet, PDF (24/142 Pages) Winbond – Winbond LPC I/O

W83627THF/W83627THG
General Purpose I/O Port 3, 4 (Power source is VSB), continued.
SYMBOL PIN
I/O
FUNCTION
GP41
SLP_SX#
73
I/OD_12t
IN_t
General purpose I/O port 4 bit 1.
SLP_S3# input. (Default)
GP42
PWRCTL#
72
I/OD_12t
OD₁₂
General purpose I/O port 4 bit 2.
This pin generates the PWRCTL# signal while the power failure.
(Default)
GP43
PWROK
71
I/OD_12t
OD₁₂
General purpose I/O port 4 bit 3.
This pin generates the PWROK signal while the VCC come in.
(Default)
GP44
RSMRST#
70
I/OD_12t
OD₁₂
General purpose I/O port 4 bit 4.
This pin generates the RSMRST signal while the VSB come in.
(Default)
GP45
GP46
PSIN
69 I/OD_12t General purpose I/O port 4 bit 5.
68
I/OD_12t
IN_td
General purpose I/O port 4 bit 6.
Panel Switch Input. This pin is high active with an internal pull
down resistor. (Default)
GP47
PSOUT#
67
I/OD_12t ^{General purpose I/O port 4 bit 7.}
Panel Switch Output. This signal is used for Wake-Up system
OD_{12 from S5c o l d state. This pin is pulse output, active low. (Default)}
3.8.4 General Purpose I/O Port 5 (Power source is VCC)
SYMBOL PIN
I/O
FUNCTION
GP50
110 I/O_12tp3 General purpose I/O port 5 bit 0.
GP51
109 I/O_12tp3 General purpose I/O port 5 bit 1.
GP52
108 I/O_12tp3 General purpose I/O port 5 bit 2.
GP53
107 I/O_12tp3 General purpose I/O port 5 bit 3.
GP54
106 I/O_12tp3 General purpose I/O port 5 bit 4.
GP55
105 I/O_12tp3 General purpose I/O port 5 bit 5.
Note. The GPIO Port 5 could be used as VID input / output function for VRD10.
- 17 -
Publication Release Date: September 26, 2006
Revision 1.2