W83627THF_06 Datasheet, PDF (104/142 Pages) Winbond – Winbond LPC I/O

W83627THF/W83627THG
CRE7 (Default 0x00)
Bit 7
ENKD3. Enable the third set of keyboard wake-up key combinations. Its values are
accessed through keyboard wake-up index register (CRE1 of logical device A) and
keyboard wake-up data register (CRE2 of logical device A) at index from 40h to 4eh.
= 0 disable wake-up function of the third set of key combinations.
= 1 enable wake-up function of the third set of key combinations.
Bit 6
ENKD2. Enable the second set of keyboard wake-up key combinations. Its values are
accessed through keyboard wake-up index register (CRE1 of logical device A) and
keyboard wake-up data register (CRE2 of logical device A) at index from 30h to 3eh.
= 0 disable wake-up function of the second set of key combinations.
= 1 enable wake-up function of the second set of key combinations.
Bit 5
ENWIN98KEY. Enable WIN98 keyboard dedicated key to wake up system through
PANSW_OUT if keyboard wake up function is enabled.
= 0 Disable WIN98 keyboard wake up.
= 1 Enable WIN98 keyboard wake up.
Bit 4
EN_ONPSOUT. Enable to issue a 0.5s long PSOUT# pulse when system returns from
power loss state and is supposed to be on as described in CRE4 bit 6, 5 of logical device
A.
= 0 Disable this function for Intel’s Chipset.
= 1 Enable this function for Clone’s chipset.
Bit 3
SELWDTORST: Select whether Watch Dog timer function is reset by LRESET_L signal
or PWROK signal.
=0 Watch Dog timer function is reset by LRESET_L signal.
=1 Watch Dog timer function is reset by PWROK signal.
Bit 2 Reserved
Bit 1 Reserved
Bit 0 Reserved
- 97 -
Publication Release Date: September 26, 2006
Revision 1.2