English
Language : 

LM3S611-IQN50-C2T Datasheet, PDF (383/574 Pages) Texas Instruments – Stellaris® LM3S611 Microcontroller
NRND: Not recommended for new designs.
Stellaris® LM3S611 Microcontroller
Bit/Field
2
1
0
Name
EPS
PEN
BRK
Type
R/W
R/W
R/W
Reset
0
0
0
Description
UART Even Parity Select
If this bit is set to 1, even parity generation and checking is performed
during transmission and reception, which checks for an even number
of 1s in data and parity bits.
When cleared to 0, then odd parity is performed, which checks for an
odd number of 1s.
This bit has no effect when parity is disabled by the PEN bit.
UART Parity Enable
If this bit is set to 1, parity checking and generation is enabled; otherwise,
parity is disabled and no parity bit is added to the data frame.
UART Send Break
If this bit is set to 1, a Low level is continually output on the UnTX output,
after completing transmission of the current character. For the proper
execution of the break command, the software must set this bit for at
least two frames (character periods). For normal use, this bit must be
cleared to 0.
June 18, 2012
383
Texas Instruments-Production Data