AM1707_1008 Datasheet, PDF (39/199 Pages) Texas Instruments – ARM Microprocessor

AM1707
www.ti.com
SPRS637A – FEBRUARY 2010 – REVISED APRIL 2010
5.3 Electrical Characteristics Over Recommended Ranges of Supply Voltage and
Operating Junction Temperature (Unless Otherwise Noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Low/full speed:
USB0_DM and USB0_DP
V_OH
High speed:
USB_DM and USB_DP
2.8
USB0_VDDA33
V
360
440
mV
Low/full speed:
USB1_DM and USB1_DP
2.8
USB1_VDDA33
V
High-level output voltage (3.3V I/O)
DVDD= 3.15V, I_OH = -4 mA
DVDD= 3.15V, I_OH = 100 mA
2.4
2.95
Low/full speed:
USB_DM and USB_DP
0.0
V
V
0.3
V
High speed:
V_OL
USB_DM and USB_DP
-10
10
mV
Low-level output voltage (3.3V I/O)
DVDD= 3.15V, I_OL = 4mA
DVDD= 3.15V, I_OL = -100 mA
V_I = VSS to DVDD without opposing
internal resistor
0.4
V
0.2
V
±35
mA
I_I ⁽¹⁾
Input current
V_I = VSS to DVDD with opposing
internal pullup resistor ⁽²⁾
30
V_I = VSS to DVDD with opposing
internal pulldown resistor ⁽²⁾
-50
-200
mA
300
mA
V_I = VSS to USB1_VDDA33 -
USB1_DM and USB1_DP
±40
mA
I_OH
I_OL
I_OZ ⁽³⁾
C_I
High-level output current
Low-level output current
I/O Off-state output current
Input capacitance
All peripherals
All peripherals
VO = VDD or VSS; Internal pull disabled
LVCMOS signals
OSCIN and RTC_XI
-4
mA
4
mA
±35
mA
3
pF
2
pF
C_O
Output capacitance
LVCMOS signals
3
pF
(1) I_I applies to input-only pins and bi-directional pins. For input-only pins, I_I indicates the input leakage current. For bi-directional pins, I_I
indicates the input leakage current and off-state (Hi-Z) output leakage current.
(2) Applies only to pins with an internal pullup (IPU) or pulldown (IPD) resistor.
(3) I_OZ applies to output-only pins, indicating off-state (Hi-Z) output leakage current.
Copyright © 2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): AM1707
Device Operating Conditions
39