HD6413003TF10 Datasheet, PDF (80/717 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

3.3 System Control Register (SYSCR)
SYSCR is an 8-bit register that controls the operation of the H8/3003.
Bit
7
6
5
4
3
2
1
0
SSBY STS2 STS1 STS0 UE NMIEG — RAME
Initial value
0
0
0
0
1
0
1
1
Read/Write
R/W
R/W
R/W
R/W
R/W
R/W
—
R/W
RAM enable
Enables or
disables
on-chip RAM
Reserved bit
NMI edge select
Selects the valid edge
of the NMI input
User bit enable
Selects whether to use UI bit in CCR 6
as a user bit or an interrupt mask bit
Standby timer select 2 to 0
These bits select the waiting time at
recovery from software standby mode
Software standby
Enables transition to software standby mode
Bit 7—Software Standby (SSBY): Enables transition to software standby mode. (For further
information about software standby mode see section 17, Power-Down State.)
When software standby mode is exited by an external interrupt, this bit remains set to 1. To clear
this bit, write 0.
Bit 7
SSBY
0
1
Description
SLEEP instruction causes transition to sleep mode
SLEEP instruction causes transition to software standby mode
(Initial value)
60