RL78G12_15 Datasheet, PDF (70/110 Pages) Renesas Technology Corp – RENESAS MCU

RL78/G12
3. ELECTRICAL SPECIFICATIONS (G: TA = −40 to +105°C)
(1) 20-, 24-pin products
(TA = −40 to +105°C, 2.4 V ≤ VDD ≤ 5.5 V, VSS = 0 V)
Parameter Symbol
Conditions
MIN.
TYP.
MAX.
(2/2)
Unit
Supply
IDD2 ^{Note 2} HALT
current^{Note 1}
mode
HS (High-speed fIH = 24 MHz^{Note 4}
main) mode ^{Note 6}
VDD = 5.0 V
VDD = 3.0 V
440 2230 μA
440 2230
fIH = 16 MHz^{Note 4}
VDD = 5.0 V
400 1650 μA
VDD = 3.0 V
400 1650
fMX = 20 MHz^{Note 3},
VDD = 5.0 V
Square wave input
Resonator connection
280 1900 μA
450 2000
fMX = 20 MHz^{Note 3},
VDD = 3.0 V
Square wave input
Resonator connection
280 1900 μA
450 2000
fMX = 10 MHz^{Note 3},
VDD = 5.0 V
Square wave input
Resonator connection
190 1010 μA
260 1090
fMX = 10 MHz^{Note 3},
VDD = 3.0 V
Square wave input
Resonator connection
190 1010 μA
260 1090
IDD3 ^{Note 5} STOP
mode
TA = −40°C
TA = +25°C
0.19 0.50 μA
0.24 0.50
TA = +50°C
0.32 0.80
TA = +70°C
0.48 1.20
TA = +85°C
0.74 2.20
TA = +105°C
1.50 10.20
Notes 1.
2.
3.
4.
5.
6.
Total current flowing into VDD, including the input leakage current flowing when the level of the input pin is
fixed to VDD or VSS. The values below the MAX. column include the peripheral operation current. However,
not including the current flowing into the A/D converter, LVD circuit, I/O port, and on-chip pull-up/pull-down
resistors and the current flowing during data flash rewrite.
During HALT instruction execution by flash memory.
When high-speed on-chip oscillator clock is stopped.
When high-speed system clock is stopped.
Not including the current flowing into the 12-bit interval timer and watchdog timer.
Relationship between operation voltage width, operation frequency of CPU and operation mode is as
follows.
HS (High speed main) mode: VDD = 2.7 V to 5.5 V @1 MHz to 24 MHz
VDD = 2.4 V to 5.5 V @1 MHz to 16 MHz
Remarks 1.
2.
3.
fMX: High-speed system clock frequency (X1 clock oscillation frequency or external main system clock
frequency)
fIH: high-speed on-chip oscillator clock frequency
Except temperature condition of the TYP. value is TA = 25°C, other than STOP mode
R01DS0193EJ0200 Rev.2.00
Sep 06, 2013
Page 70 of 106