RL78G12_15 Datasheet, PDF (23/110 Pages) Renesas Technology Corp – RENESAS MCU

RL78/G12
2. ELECTRICAL SPECIFICATIONS (A, D: TA = −40 to +85°C)
2.3.2 Supply current characteristics
(1) 20-, 24-pin products
(TA = −40 to +85°C, 1.8 V ≤ VDD ≤ 5.5 V, VSS = 0 V)
Parameter Symbol
Conditions
MIN.
TYP.
MAX.
(1/2)
Unit
Supply
IDD1
current^{Note 1}
Operating HS(High-speed fIH = 24 MHz^{Note 3}
mode
main) mode ^{Note 4}
Basic
VDD = 5.0 V
operation _{VDD = 3.0 V}
1.5
mA
1.5
Normal VDD = 5.0 V
operation _{VDD = 3.0 V}
3.3
5.0
mA
3.3
5.0
fIH = 16 MHz^{Note 3}
VDD = 5.0 V
2.5
3.7
mA
VDD = 3.0 V
2.5
3.7
LS(Low-speed fIH = 8 MHz^{Note 3}
main) mode ^{Note 4}
VDD = 3.0 V
VDD = 2.0 V
1.2
1.8
mA
1.2
1.8
HS(High-speed fMX = 20 MHz^{Note 2},
main) mode ^Note4 VDD = 5.0 V
Square wave input
Resonator connection
2.8
4.4
mA
3.0
4.6
fMX = 20 MHz^{Note 2},
VDD = 3.0 V
Square wave input
Resonator connection
2.8
4.4
mA
3.0
4.6
fMX = 10 MHz^{Note 2},
VDD = 5.0 V
Square wave input
Resonator connection
1.8
2.6
mA
1.8
2.6
fMX = 10 MHz^{Note 2},
VDD = 3.0 V
Square wave input
Resonator connection
1.8
2.6
mA
1.8
2.6
LS(Low-speed fMX = 8 MHz^{Note 2},
main) mode ^{Note 4} VDD = 3.0 V
Square wave input
Resonator connection
1.1
1.7
mA
1.1
1.7
fMX = 8 MHz^{Note 2},
VDD = 2.0 V
Square wave input
Resonator connection
1.1
1.7
mA
1.1
1.7
<R> _{Notes 1. Total current flowing into VDD, including the input leakage current flowing when the level of the input pin is}
fixed to VDD or VSS. The values below the MAX. column include the peripheral operation current. However,
not including the current flowing into the A/D converter, LVD circuit, I/O port, and on-chip pull-up/pull-down
resistors and the current flowing during data flash rewrite.
<R>
2. When high-speed on-chip oscillator clock is stopped.
3. When high-speed system clock is stopped
4. Relationship between operation voltage width, operation frequency of CPU and operation mode is as
follows.
HS(High speed main) mode: VDD = 2.7 V to 5.5 V @1 MHz to 24 MHz
VDD = 2.4 V to 5.5 V @1 MHz to 16 MHz
LS(Low speed main) mode: VDD = 1.8 V to 5.5 V @1 MHz to 8 MHz
Remarks 1.
2.
3.
fMX: High-speed system clock frequency (X1 clock oscillation frequency or external main system clock
frequency)
fIH: high-speed on-chip oscillator clock frequency
Temperature condition of the TYP. value is TA = 25°C.
R01DS0193EJ0200 Rev.2.00
Sep 06, 2013
Page 23 of 106