|
RL78G12_15 Datasheet, PDF (17/110 Pages) Renesas Technology Corp – RENESAS MCU | |||
|
◁ |
RL78/G12
2. ELECTRICAL SPECIFICATIONS (A, D: TA = â40 to +85°C)
2.1 Absolute Maximum Ratings
Absolute Maximum Ratings (TA = 25°C)
<R>
Parameter
Symbols
Supply Voltage
REGC terminal input
voltageNote1
VDD
VIREGC
REGC
Conditions
Ratings
Unit
â0.5 to + 6.5
V
â0.3 to +2.8
V
and â0.3 to VDD + 0.3
Note 2
Input Voltage
VI1
Other than P60, P61
â0.3 to VDD + 0.3Note 3
V
VI2
P60, P61 (N-ch open drain)
â0.3 to 6.5
V
Output Voltage
VO
â0.3 to VDD + 0.3Note 3
V
Analog input voltage VAI
20-, 24-pin products: ANI0 to ANI3, ANI16 to ANI22
â0.3 to VDD + 0.3
V
30-pin products: ANI0 to ANI3, ANI16 to ANI19
and â0.3 to
AVREF(+)+0.3 Notes 3, 4
Output current, high IOH1
Per pin
Other than P20 to P23
â40
mA
Total of all pins All the terminals other than P20 to P23
â170
mA
20-, 24-pin products: P40 to P42
â70
mA
30-pin products: P00, P01, P40, P120
20-, 24-pin products: P00 to P03Note 5,
â100
mA
P10 to P14
30-pin products: P10 to P17, P30, P31,
P50, P51, P147
IOH2
Per pin
P20 to P23
â0.5
mA
Total of all pins
â2
mA
Output current, low IOL1
Per pin
Other than P20 to P23
40
mA
Total of all pins All the terminals other than P20 to P23
170
mA
20-, 24-pin products: P40 to P42
30-pin products: P00, P01, P40, P120
70
mA
20-, 24-pin products: P00 to P03Note 5,
100
mA
P10 to P14, P60, P61
30-pin products: P10 to P17, P30, P31,
P50, P51, P60, P61, P147
IOL2
Per pin
P20 to P23
1
mA
Total of all pins
5
mA
Operating ambient TA
temperature
â40 to +85
°C
Storage temperature Tstg
â65 to +150
°C
Notes 1.
2.
3.
4.
5.
30-pin product only.
Connect the REGC pin to VSS via a capacitor (0.47 to 1 μF). This value determines the absolute maximum
rating of the REGC pin. Do not use it with voltage applied.
Must be 6.5 V or lower.
Do not exceed AVREF (+) + 0.3 V in case of A/D conversion target pin.
24-pin products only.
Caution
Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
Remarks 1. Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the port
pins.
2. AVREF (+): + side reference voltage of the A/D converter.
3. VSS: Reference voltage
R01DS0193EJ0200 Rev.2.00
Sep 06, 2013
Page 17 of 106
|
▷ |