M306V5ME-XXXSP Datasheet, PDF (106/262 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER

MITSUBISHI MICROCOMPUTERS
M306V5ME-XXXSP
M306V5EESP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
Table 2.11.6 Specifications of UART Mode (2)
Item
Specification
Select function
• Sleep mode selection (UART0)
This mode is used to transfer data to and from one of multiple slave micro-
computers
• Serial data logic switch (UART2)
This function is reversing logic value of transferring data. Start bit, parity bit
and stop bit are not reversed.
• TxD, RxD I/O polarity switch
This function is reversing TxD port output and RxD port input. All I/O data
level is reversed.
Notes 1: ‘n’ denotes the value 0016 to FF16 that is set to the UARTi bit rate generator.
2: fEXT is input from the CLKi pin.
3: If an overrun error occurs, the UARTi receive buffer will have the next data written in. Note also
that the UARTi receive interrupt request bit is not set to “1”.
Rev. 1.0
106