N25Q128A13ESE40G Datasheet, PDF (67/81 Pages) Micron Technology – Micron Serial NOR Flash Memory 3V, Multiple I/O, 4KB Sector Erase N25Q128A

128Mb, 3V, Multiple I/O Serial Flash Memory
Absolute Ratings and Operating Conditions
Absolute Ratings and Operating Conditions
Stresses greater than those listed may cause permanent damage to the device. This is a
stress rating only. Exposure to absolute maximum rating and operating conditions for
extended periods may adversely affect reliability. Stressing the device beyond the abso-
lute maximum ratings may cause permanent damage.
Table 32: Absolute Ratings
Symbol
T_STG
T_LEAD
V_CC
V_PP
V_IO
V_ESD
Parameter
Storage temperature
Lead temperature during soldering
Supply voltage
Fast program/erase voltage
Input/output voltage with respect to ground
Electrostatic discharge voltage
(human body model)
Min
–65
–
–0.6
–0.2
–0.6
–2000
Max
150
See note 1
4.0
10
V_CC + 0.6
2000
Units
°C
°C
V
V
V
V
Notes
2
Notes:
1. Compliant with JEDEC Standard J-STD-020C (for small-body, Sn-Pb or Pb assembly),
RoHS, and the European directive on Restrictions on Hazardous Substances (RoHS)
2002/95/EU.
2. JEDEC Standard JESD22-A114A (C1 = 100pF, R1 = 1500Ω, R2 = 500Ω).
Table 33: Operating Conditions
Symbol
V_CC
V_PPH
T_A
T_A
Parameter
Supply voltage
Supply voltage on V_PP
Ambient operating temperature
Ambient operating temperature, automotive
Min
2.7
8.5
–40
–40
Max
3.6
9.5
85
125
Units
V
V
°C
°C
Table 34: Input/Output Capacitance
Note 1 applies to entire table
Symbol Description
Test Condition
Min
Max
C_IN/OUT
Input/output capacitance
(DQ0/DQ1/DQ2/DQ3)
V_OUT = 0V
–
8
C_IN
Input capacitance (other pins)
V_IN = 0V
–
6
Note: 1. These parameters are sampled only, not 100% tested. T_A = 25°C at 54 MHz.
Units
pF
pF
PDF: 09005aef845665fe
n25q_128mb_3v_65nm.pdf - Rev. P 06/13 EN
67
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2012 Micron Technology, Inc. All rights reserved.