PIC18F2525_08 Datasheet, PDF (363/412 Pages) Microchip Technology – 28/40/44-Pin Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

PIC18F2525/2620/4525/4620
27.0 DC AND AC CHARACTERISTICS GRAPHS AND TABLES
Note:
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein
are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore, outside the warranted range.
“Typical” represents the mean of the distribution at 25°C. “Maximum” or “minimum” represents (mean + 3σ) or (mean – 3σ)
respectively, where σ is a standard deviation, over the whole temperature range.
FIGURE 27-1:
100
SLEEP MODE
Test instrument results are compressed to about 0.05 μA for actual values below 0.05 μA.
Measurements below 0.01 μA are suspect, and are considered unmeasurable.
This is supported by the instrument specifications.
10
5.5
5.0
4.5
4.0
1
3.5
3.0
2.5
2.0
0.1
0.01
-50
-25
0
25
50
75
100
125
Temp (C)
© 2008 Microchip Technology Inc.
DS39626E-page 361