PIC18F2525_08 Datasheet, PDF (343/412 Pages) Microchip Technology – 28/40/44-Pin Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

PIC18F2525/2620/4525/4620
26.4.2 TIMING CONDITIONS
The temperature and voltages specified in Table 26-5
apply to all timing specifications unless otherwise
noted. Figure 26-5 specifies the load conditions for the
timing specifications.
Note:
Because of space limitations, the generic
terms “PIC18FXXXX” and “PIC18LFXXXX”
are used throughout this section to refer to
the PIC18F2525/2620/4525/4620 and
PIC18LF2525/2620/4525/4620 families of
devices specifically and only those devices.
TABLE 26-5: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
Operating voltage VDD range as described in DC spec Section 26.1 and
Section 26.3.
LF parts operate for industrial temperatures only.
FIGURE 26-5:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1
Load Condition 2
VDD/2
RL
Pin
CL
VSS
Pin
CL
RL = 464Ω
VSS
CL = 50 pF for all pins except OSC2/CLKO
and including D and E outputs as ports
© 2008 Microchip Technology Inc.
DS39626E-page 341