PIC24FJ256GB110-I Datasheet, PDF (303/328 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit Flash Microcontrollers with USB On-The-Go (OTG)

PIC24FJ256GB110 FAMILY
28.2 AC Characteristics and Timing Parameters
The information contained in this section defines the PIC24FJ256GB110 family AC characteristics and timing parameters.
TABLE 28-11: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Operating voltage VDD range as described in Section 28.1 “DC Characteristics”.
FIGURE 28-2:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSCO
Load Condition 2 – for OSCO
VDD/2
RL
Pin
CL
VSS
Pin
CL
VSS
RL = 464Ω
CL = 50 pF for all pins except OSCO
15 pF for OSCO output
TABLE 28-12: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
DO50 COSC2 OSCO/CLKO pin
—
— 15 pF In XT and HS modes when
external clock is used to drive
OSCI.
DO56 CIO
DO58 CB
All I/O pins and OSCO
SCLx, SDAx
—
— 50 pF EC mode.
—
— 400 pF In I²C™ mode.
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
© 2008 Microchip Technology Inc.
Preliminary
DS39897B-page 301