PIC24FJ256GB110-I Datasheet, PDF (193/328 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit Flash Microcontrollers with USB On-The-Go (OTG)

PIC24FJ256GB110 FAMILY
REGISTER 16-1: UxMODE: UARTx MODE REGISTER (CONTINUED)
bit 4
bit 3
bit 2-1
bit 0
RXINV: Receive Polarity Inversion bit
1 = UxRX Idle state is ‘0’
0 = UxRX Idle state is ‘1’
BRGH: High Baud Rate Enable bit
1 = BRG generates 4 clocks per bit period (4x baud clock, High-Speed mode)
0 = BRG generates 16 clocks per bit period (16x baud clock, Standard mode)
PDSEL1:PDSEL0: Parity and Data Selection bits
11 = 9-bit data, no parity
10 = 8-bit data, odd parity
01 = 8-bit data, even parity
00 = 8-bit data, no parity
STSEL: Stop Bit Selection bit
1 = Two Stop bits
0 = One Stop bit
Note 1: If UARTEN = 1, the peripheral inputs and outputs must be configured to an available RPn pin.
See Section 9.4 “Peripheral Pin Select” for more information.
2: This feature is only available for the 16x BRG mode (BRGH = 0).
© 2008 Microchip Technology Inc.
Preliminary
DS39897B-page 191