PIC24FJ256GB110-I Datasheet, PDF (302/328 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit Flash Microcontrollers with USB On-The-Go (OTG)

PIC24FJ256GB110 FAMILY
TABLE 28-8: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param
No.
Sym
Characteristic
Min
Typ⁽¹⁾ Max Units
Conditions
VOL Output Low Voltage
DO10
I/O Ports
—
— 0.4
V IOL = 8.5 mA, VDD = 3.6V
—
— 0.4
V IOL = 6.0 mA, VDD = 2.0V
DO16
OSC2/CLKO
—
— 0.4
V IOL = 8.5 mA, VDD = 3.6V
—
— 0.4
V IOL = 6.0 mA, VDD = 2.0V
VOH Output High Voltage
DO20
I/O Ports
3.0
—
—
V IOH = -3.0 mA, VDD = 3.6V
2.4
—
—
V IOH = -6.0 mA, VDD = 3.6V
1.65
—
—
V IOH = -1.0 mA, VDD = 2.0V
1.4
—
—
V IOH = -3.0 mA, VDD = 2.0V
DO26
OSC2/CLKO
2.4
—
—
V IOH = -6.0 mA, VDD = 3.6V
1.4
—
—
V IOH = -3.0 mA, VDD = 2.0V
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
TABLE 28-9: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param
No.
Sym
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
Program Flash Memory
D130 EP Cell Endurance
10000 —
D131 VPR VDD for Read
VMIN
—
D132B VPEW VDD for Self-Timed Write 2.25 —
D133A TIW Self-Timed Write Cycle
—
3
Time
D133B TIE Self-Timed Page Erase
40
—
Time
D134 TRETD Characteristic Retention
20
—
— E/W
3.6
V
3.6
V
—
ms
—
ms
— Year
D135 IDDP Supply Current during
Programming
—
7
—
mA
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
-40°C to +85°C
VMIN = Minimum operating voltage
VMIN = Minimum operating voltage
Provided no other specifications are
violated
TABLE 28-10: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
Operating Conditions: -40°C < TA < +85°C (unless otherwise stated)
Param
No.
Symbol
Characteristics
Min Typ Max Units
Comments
VRGOUT Regulator Output Voltage
— 2.5 —
V
CEFC External Filter Capacitor Value 4.7 10 — μF Series resistance < 3 Ohm
recommended; < 5 Ohm
required.
TVREG
— 50 — μs ENVREG tied to VDD
TPWRT
— 64 — ms ENVREG tied to VSS
DS39897B-page 300
Preliminary
© 2008 Microchip Technology Inc.