PIC18LF4610T-I Datasheet, PDF (263/376 Pages) Microchip Technology – 28/40/44-Pin Flash Microcontrollers

23.1.1 STANDARD INSTRUCTION SET
ADDLW
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
Q Cycle Activity:
Q1
Decode
ADD Literal to W
ADDLW k
0 ≤ k ≤ 255
(W) + k → W
N, OV, C, DC, Z
0000 1111 kkkk kkkk
The contents of W are added to the
8-bit literal ‘k’ and the result is placed in
W.
1
1
Q2
Read
literal ‘k’
Q3
Process
Data
Q4
Write to W
Example:
ADDLW 15h
Before Instruction
W = 10h
After Instruction
W = 25h
PIC18F2X1X/4X1X
ADDWF
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
ADD W to f
ADDWF f {,d {,a}}
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
(W) + (f) → dest
N, OV, C, DC, Z
0010 01da ffff ffff
Add W to register ‘f’. If ‘d’ is ‘0’, the
result is stored in W. If ‘d’ is ‘1’, the
result is stored back in register ‘f’
(default).
If ‘a’ is ‘0’, the Access Bank is selected.
If ‘a’ is ‘1’, the BSR is used to select the
GPR bank (default).
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f ≤ 95 (5Fh). See
Section 23.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
1
1
Q Cycle Activity:
Q1
Decode
Q2
Read
register ‘f’
Q3
Process
Data
Q4
Write to
destination
Example:
ADDWF
Before Instruction
W
=
REG =
After Instruction
17h
0C2h
W
REG
= 0D9h
= 0C2h
REG, 0, 0
Note: All PIC18 instructions may take an optional label argument preceding the instruction mnemonic for use in
symbolic addressing. If a label is used, the instruction format then becomes: {label} instruction argument(s).
© 2009 Microchip Technology Inc.
DS39636D-page 265