PIC18LF4610T-I Datasheet, PDF (16/376 Pages) Microchip Technology – 28/40/44-Pin Flash Microcontrollers

PIC18F2X1X/4X1X
TABLE 1-3: PIC18F2410/2415/2510/2515/2610 PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number
Pin Buffer
SPDIP,
SOIC
QFN
Type
Type
Description
RC0/T1OSO/T13CKI
RC0
T1OSO
T13CKI
PORTC is a bidirectional I/O port.
11
8
I/O ST Digital I/O.
O—
Timer1 oscillator output.
I ST Timer1/Timer3 external clock input.
RC1/T1OSI/CCP2
RC1
T1OSI
CCP2⁽²⁾
12
9
I/O ST Digital I/O.
I Analog Timer1 oscillator input.
I/O ST Capture 2 input/Compare 2 output/PWM 2 output.
RC2/CCP1
RC2
CCP1
13 10
I/O ST Digital I/O.
I/O ST Capture 1 input/Compare 1 output/PWM 1 output.
RC3/SCK/SCL
RC3
SCK
SCL
14 11
I/O ST
I/O ST
I/O ST
Digital I/O.
Synchronous serial clock input/output for SPI mode.
Synchronous serial clock input/output for I²C™ mode.
RC4/SDI/SDA
RC4
SDI
SDA
15 12
I/O ST
I ST
I/O ST
Digital I/O.
SPI data in.
I²C data I/O.
RC5/SDO
RC5
SDO
16 13
I/O ST
O—
Digital I/O.
SPI data out.
RC6/TX/CK
RC6
TX
CK
17 14
I/O ST
O—
I/O ST
Digital I/O.
EUSART asynchronous transmit.
EUSART synchronous clock (see related RX/DT).
RC7/RX/DT
RC7
RX
DT
18 15
I/O ST
I ST
I/O ST
Digital I/O.
EUSART asynchronous receive.
EUSART synchronous data (see related TX/CK).
RE3
— — — — See MCLR/VPP/RE3 pin.
VSS
8, 19 5, 16 P — Ground reference for logic and I/O pins.
VDD
20 17 P — Positive supply for logic and I/O pins.
Legend: TTL = TTL compatible input
CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels I
= Input
O = Output
P
= Power
Note 1: Default assignment for CCP2 when Configuration bit, CCP2MX, is set.
2: Alternate assignment for CCP2 when Configuration bit, CCP2MX, is cleared.
DS39636D-page 18
© 2009 Microchip Technology Inc.