PIC24F16KL402 Datasheet, PDF (204/260 Pages) Microchip Technology – Low-Power, Low-Cost, General Purpose 16-Bit Flash Microcontrollers with nanoWatt XLP Technology

PIC24F16KL402 FAMILY
TABLE 26-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V
Operating temperature -40°C  TA  +85°C for Industrial
Parameter No. Typical⁽¹⁾ Max
Units
Conditions
Power-Down Current (IPD)
DC60
0.01
0.20
µA
-40°C
0.03
0.20
0.06
0.87
µA
+25°C
µA
+60°C
1.8V
0.20
1.35
0.01
0.54
µA
+85°C
µA
-40°C
Sleep Mode⁽²⁾
0.03
0.54
0.08
1.68
µA
+25°C
µA
+60°C
3.3V
0.25
2.45
µA
+85°C
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated.
2: Base IPD is measured with all peripherals and clocks disabled. All I/Os are configured as outputs and set
low; PMDx bits are set to ‘1’ and WDT, etc., are all disabled
TABLE 26-9: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V
Operating temperature -40°C  TA  +85°C for Industrial
Parameter No. Typical⁽¹⁾ Max
Units
Conditions
Module Differential Current (IPD)
DC71
0.21
0.65
µA
0.45
0.95
µA
1.8V
3.3V
Watchdog Timer Current
WDT^(2,3)
DC72
0.69
1.50
µA
1.00
1.50
µA
1.8V
3.3V
32 kHz Crystal with Timer1:
SOSC (SOSCSEL = 0)⁽²⁾
DC75
5.24
—
µA
5.16
11.00
µA
1.8V
3.3V
HLVD^(2,3)
DC76
4.15
9.00
µA
3.3V
BOR^(2,3)
DC78
0.03
0.20
µA
0.03
0.20
µA
1.8V
3.3V
LPBOR⁽²⁾
Note 1:
2:
3:
Data in the Typical column is at 3.3V, 25°C unless otherwise stated.
The  current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
This current applies to Sleep only.
DS31037B-page 204
 2011 Microchip Technology Inc.