PIC24F16KL402 Datasheet, PDF (132/260 Pages) Microchip Technology – Low-Power, Low-Cost, General Purpose 16-Bit Flash Microcontrollers with nanoWatt XLP Technology

PIC24F16KL402 FAMILY
REGISTER 16-5: PSTR1CON: PULSE STEERING CONTROL REGISTER FOR ECCP1⁽¹⁾
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
bit 15
U-0
—
bit 8
R/W-0
CMPL1
bit 7
R/W-0
CMPL0
U-0
R/W-0
R/W-0
—
STRSYNC
STRD
R/W-0
STRC
R/W-0
STRB
R/W-1
STRA
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-8
bit 7-6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Unimplemented: Read as ‘0’
CMPL<1:0>: Complementary Mode Output Assignment Steering bits
00 = Complementary output assignment is disabled; the STR<D:A> bits are used to determine
Steering mode
01 = PxA and PxB are selected as the complementary output pair
10 = PxA and PxC are selected as the complementary output pair
11 = PxA and PxD are selected as the complementary output pair
Unimplemented: Read as ‘0’
STRSYNC: Steering Sync bit
1 = Output steering update occurs on the next PWM period
0 = Output steering update occurs at the beginning of the instruction cycle boundary
STRD: Steering Enable D bit
1 = P1D pin has the PWM waveform with polarity control from CCP1M<1:0>
0 = P1D pin is assigned to port pin
STRC: Steering Enable C bit
1 = P1C pin has the PWM waveform with polarity control from CCP1M<1:0>
0 = P1C pin is assigned to port pin
STRB: Steering Enable B bit
1 = P1B pin has the PWM waveform with polarity control from CCP1M<1:0>
0 = P1B pin is assigned to port pin
STRA: Steering Enable A bit
1 = P1A pin has the PWM waveform with polarity control from CCP1M<1:0>
0 = P1A pin is assigned to port pin
Note 1: This register is only implemented on PIC24FXXKL40X/30X devices. In addition, PWM Steering mode is
available only when CCP1M<3:2> = 11 and PM<1:0> = 00.
DS31037B-page 132
 2011 Microchip Technology Inc.