PIC24F16KL402 Datasheet, PDF (113/260 Pages) Microchip Technology – Low-Power, Low-Cost, General Purpose 16-Bit Flash Microcontrollers with nanoWatt XLP Technology

PIC24F16KL402 FAMILY
REGISTER 11-1: ANSA: ANALOG SELECTION (PORTA)
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
U-0
R/W-1
R/W-1
R/W-1
R/W-1
—
—
—
—
ANSA3
ANSA2
ANSA1
ANSA0
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
U = Unimplemented bit, read as ‘0’
W = Writable bit
HSC = Hardware Settable/Clearable bit
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-4
bit 3-0
Unimplemented: Read as ‘0’
ANSA<3:0>: Analog Select Control bits
1 = Digital input buffer is not active (use for analog input)
0 = Digital input buffer is active
REGISTER 11-2: ANSB: ANALOG SELECTION (PORTB)
R/W-1
R/W-1
R/W-1
R/W-1
U-0
U-0
U-0
U-0
ANSB15
ANSB14 ANSB13⁽¹⁾ ANSB12⁽¹⁾
—
—
—
—
bit 15
bit 8
U-0
U-0
U-0
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
—
—
—
ANSB4
ANSB3⁽²⁾
ANSB2⁽¹⁾
ANSB1⁽¹⁾
ANSB0⁽¹⁾
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
U = Unimplemented bit, read as ‘0’
W = Writable bit
HSC = Hardware Settable/Clearable bit
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-12
bit 11-5
bit 4-0
ANSB<15:12>: Analog Select Control bits⁽¹⁾
1 = Digital input buffer is not active (use for analog input)
0 = Digital input buffer is active
Unimplemented: Read as ‘0’
ANSB<4:0>: Analog Select Control bits⁽²⁾
1 = Digital input buffer is not active (use for analog input)
0 = Digital input buffer is active
Note 1: ANSB<13:12,2:0> are unimplemented on 14-pin devices.
2: ANSB<3> is unimplemented on 14-pin and 20-pin devices.
 2011 Microchip Technology Inc.
DS31037B-page 113