PIC24HJ12GP201 Datasheet, PDF (191/234 Pages) Microchip Technology – High-Performance, 16-Bit Microcontrollers

PIC24HJ12GP201/202
TABLE 21-9: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
VIL
Input Low Voltage
DI10
I/O pins
VSS
— 0.2 VDD V
DI15
MCLR
VSS
— 0.2 VDD V
DI16
OSC1 (XT mode)
VSS
— 0.2 VDD V
DI17
OSC1 (HS mode)
VSS
— 0.2 VDD V
DI18
SDAx, SCLx
VSS
— 0.3 VDD V SMbus disabled
DI19
SDAx, SCLx
VSS
— 0.2 VDD V SMbus enabled
VIH
Input High Voltage
DI20
I/O pins:
with analog functions
digital-only
0.8 VDD —
VDD
V
0.8 VDD —
5.5
V
DI25
MCLR
0.8 VDD —
VDD
V
DI26
OSC1 (XT mode)
0.7 VDD —
VDD
V
DI27
OSC1 (HS mode)
0.7 VDD —
VDD
V
DI28
SDAx, SCLx
0.7 VDD —
VDD
V SMbus disabled
DI29
SDAx, SCLx
0.8 VDD —
VDD
V SMbus enabled
ICNPU CNx Pull-up Current
DI30
IIL
Input Leakage Current⁽²⁾⁽³⁾
50
250 400
μA VDD = 3.3V, VPIN = VSS
DI50
I/O ports
—
—
±2
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
DI51
Analog Input Pins
—
—
±2
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
DI51a
Analog Input Pins
—
—
±2
μA Analog pins shared with
external reference pins
DI51b
Analog Input Pins
—
—
±3.5
μA VSS ≤ VPIN ≤ VDD, Pin at
high-impedance,
-40°C ≤ TA ≤ +125°C
DI51c
Analog Input Pins
—
—
±8
μA Analog pins shared with
external reference pins,
-40°C ≤ TA ≤ +125°C
DI55
MCLR
—
—
±2
μA VSS ≤ VPIN ≤ VDD
DI56
OSC1
—
—
±2
μA VSS ≤ VPIN ≤ VDD,
XT and HS modes
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
© 2007 Microchip Technology Inc.
Preliminary
DS70282B-page 189