PIC32MX320F032H_11 Datasheet, PDF (169/214 Pages) Microchip Technology – High-Performance, General Purpose and USB, 32-bit Flash Microcontrollers

PIC32MX3XX/4XX
FIGURE 29-7:
INPUT CAPTURE (CAPx) TIMING CHARACTERISTICS
ICx
IC10
IC11
IC15
Note: Refer to Figure 29-1 for load conditions.
TABLE 29-25: INPUT CAPTURE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Param.
No.
Symbol
Characteristics⁽¹⁾
Min.
Max. Units
Conditions
IC10
TCCL ICx Input Low Time
[(12.5 ns or 1TPB)/N]
+ 25 ns
—
ns Must also ^{N = prescale}
meet
value (1, 4, 16)
parameter
IC15.
IC11
TCCH ICx Input High Time
[(12.5 ns or 1TPB)/N]
+ 25 ns
—
ns _{Must also}
meet
parameter
IC15.
IC15
TCCP ICx Input Period
[(25 ns or 2TPB)/N]
— ns
—
+ 50 ns
Note 1: These parameters are characterized, but not tested in manufacturing.
FIGURE 29-8:
OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
OCx
(Output Compare
or PWM Mode)
OC11
Note: Refer to Figure 29-1 for load conditions.
OC10
TABLE 29-26: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Param.
No.
Symbol
Characteristics⁽¹⁾
Min. Typical⁽²⁾ Max. Units
Conditions
OC10 TCCF OCx Output Fall Time
—
—
—
ns See parameter DO32.
OC11 TCCR OCx Output Rise Time
—
—
—
ns See parameter DO31.
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
© 2011 Microchip Technology Inc.
DS61143H-page 169