PIC32MX320F032H_11 Datasheet, PDF (156/214 Pages) Microchip Technology – High-Performance, General Purpose and USB, 32-bit Flash Microcontrollers

PIC32MX3XX/4XX
TABLE 29-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-Temp
Parameter
No.
Typical⁽²⁾
Max.
Units
Conditions
Module Differential Current (Continued)
DC43
—
1100
μA
-40°C
DC43a
DC43b
—
1100
μA
+25°C
2.5V
—
1000
μA
+85°C
ADC: ΔIADC (Notes 3, 4, 6)
DC43h
—
1200
µA
+105ºC
DC43c
880
—
μA
—
—
ADC: ΔIADC (Notes 3, 4)
DC43e
—
1100
μA
-40°C
DC43f
DC43g
—
1100
μA
+25°C
3.6V
—
1000
μA
+85°C
ADC: ΔIADC (Notes 3, 4)
DC43i
—
1200
µA
+105ºC
Note 1: Base IPD is measured with all digital peripheral modules disabled. All I/Os are configured as inputs and
pulled low. WDT and FSCM are disabled.
2: Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
3: The Δ current is the additional current consumed when the module is enabled. This current should be added
to the base IPD current.
4: Test conditions for ADC module differential current are as follows: Internal ADC RC oscillator enabled.
5: Data is characterized at +70°C and not tested. Parameter is for design guidance only.
6: This parameter is characterized, but not tested in manufacturing.
DS61143H-page 156
© 2011 Microchip Technology Inc.