MAX1329 Datasheet, PDF (2/78 Pages) Maxim Integrated Products – 12-/16-Bit DASs with ADC, DACs, DPIOs, APIOs, Reference, Voltage Monitors, and Temp Sensor

12-/16-Bit DASs with ADC, DACs, DPIOs, APIOs,
Reference, Voltage Monitors, and Temp Sensor
ABSOLUTE MAXIMUM RATINGS
AV_DD to AGND .........................................................-0.3V to +6V
DV_DD to DGND.........................................................-0.3V to +6V
Analog Inputs to AGND....................................-0.3V to the lower
of (AV_DD + 0.3V) or +6V
Digital Inputs to DGND.....................................-0.3V to the lower
AGND to DGND.................................................... -0.3V to +0.3V
Continuous Current into Any Pin.......................................±50mA
Continuous Power Dissipation (T_A = +70°C)
40-Pin Thin QFN (derate 37mW/°C above +70°C) ....2963mW
Operation Temperature Range............................-40°C to +85°C
of (DV_DD + 0.3V) or +6V
Analog Outputs to AGND .................................-0.3V to the lower
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
of (AV_DD + 0.3V) or +6V
Digital Outputs to DGND ..................................-0.3V to the lower
Lead Temperature (soldering, 10s) ................................+300°C
of (DV_DD + 0.3V) or 6V
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(DV_DD = 1.8V to 3.6V, AV_DD = 2.7V to 5.5V, V_REFDAC = V_REFADC = 2.5V, external reference; 10µF capacitor at REFADC and REFDAC;
0.01µF capacitor at REFADJ; T_A = T_MIN to T_MAX, unless otherwise noted. Typical values are at T_A = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
ADC
Resolution
No missing codes
12
Bits
DSP-Mode Resolution
256 oversampling, dither enabled
16
Bits
Integral Nonlinearity
Differential Nonlinearity
Offset Error
INL
DNL
Normal mode (Note 1)
Normal mode (Note 1)
(Note 1)
±1
LSB₁₂
±1
LSB₁₂
±4
mV
Offset Drift
±1.5
µV/°C
Gain Error (Excluding Reference)
(Note 1)
Gain = 1
Gain = 2, 4
Gain = 8
±0.1
±1.5
±2.5
% FS
Gain Temperature Coefficient
Excluding reference
±0.8
ppm/°C
Voltage Range
Unipolar mode, gain = 1, 2, 4, 8
Bipolar mode, gain = 1, 2, 4, 8
0
+V_REFADC/
Gain
V
-V_REFADC/
+V_REFADC/
(2 x Gain)
(2 x Gain)
Absolute Input Voltage Range
Input Leakage Current into
Analog Inputs
Input Capacitance
Acquisition Time
Conversion Time
Conversion Clock Frequency
t_ACQ
t_CONV
(Note 2)
Gain = 1, 2
Gain = 4, 8
Gain = 1, 2
Gain = 4, 8
12 clocks
AGND
0.6
1.2
2.4
0.1
±0.5
24
48
AV_DD
±1
5.0
V
nA
pF
µs
µs
MHz
ADC Supply Current (Note 3)
Normal operation mode,
ADC converting at 234ksps
Fast power-down mode,
ADC converting at 234ksps
325
µA
210
Aperture Delay
t_AD
30
ns
2 _______________________________________________________________________________________