71M6541D Datasheet, PDF (138/166 Pages) Maxim Integrated Products – 0.1% Accuracy Over 2000:1 Current Range Energy Meter ICs

71M6541D/F/G and 71M6542F/G Data Sheet
6 Electrical Specifications
This section provides the electrical specifications for the 71M654x. Please refer to the 71M6xxx Data
Sheet for the 71M6x01 electrical specifications, pin-out, and package mechanical data.
The devices are 100% production tested at room temperature, and performance over the full temperature
range is guaranteed by design.
6.1 Absolute Maximum Ratings
Table 93 shows the absolute maximum ratings for the device. Stresses beyond Absolute Maximum Ratings
may cause permanent damage to the device. These are stress ratings only and functional operation at
these or any other conditions beyond those indicated under recommended operating conditions (see 6.3
Recommended Operating Conditions) is not implied. Exposure to absolute-maximum-rated conditions
for extended periods may affect device reliability. All voltages are with respect to GNDA.
Table 93: Absolute Maximum Ratings
Supplies and Ground Pins
V3P3SYS, V3P3A
VBAT, VBAT_RTC
GNDD
Analog Output Pins
VREF
Voltage and Current
VDD
V3P3D
VLCD
Analog Input Pins
IAP-IAN, VA, IBP-IBN, VB^† (^† 71M6542F/G
only)
−0.5 V to 4.6 V
-0.5 V to 4.6 V
-0.1 V to +0.1 V
-10 mA to +10 mA,
-0.5 V to V3P3A+0.5 V
-10 mA to 10 mA,
-0.5 to 3.0 V
-10 mA to 10 mA,
-0.5 V to 4.6 V
-10 mA to 10 mA,
-0.5 V to 6 V
-10 mA to +10 mA
-0.5 V to V3P3A+0.5 V
XIN, XOUT
SEG and SEGDIO Pins
Configured as SEG or COM drivers
Configured as Digital Inputs
Configured as Digital Outputs
Digital Pins
Inputs (PB, RESET, RX, ICE_E, TEST)
Outputs (TX)
Temperature and ESD Stress
Operating junction temperature (peak, 100ms)
Operating junction temperature (continuous)
Storage temperature
-10 mA to +10 mA
-0.5 V to 3.0 V
-1 mA to 1 mA,
-0.5 V to VLCD+0.5 V
-10 mA to 10 mA,
-0.5 V to 6 V
-10 mA to 10 mA,
-0.5 V to V3P3D+0.5 V
-10 mA to 10 mA,
-0.5 to 6 V
-10 mA to 10 mA,
-0.5 V to V3P3D+0.5 V
140 °C
125 °C
−45 °C to +165 °C