TC1798 Datasheet, PDF (98/200 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1798
PinningTC1798 Pin Configuration
5) IOZ1 valid for this pin is the parameter with overlayed = No in the ADC parameter table.
6) IOZ1 valid for this pin is the parameter with overlayed = Yes in the ADC parameter table.
Legend for Table 2
Column “Ctrl.”:
I = Input (for GPIO port lines with IOCR bit field selection PCx = 0XXX_B)
O = Output
O0 = Output with IOCR bit field selection PCx = 1X00_B
O1 = Output with IOCR bit field selection PCx = 1X01_B (ALT1)
O2 = Output with IOCR bit field selection PCx = 1X10_B(ALT2)
O3 = Output with IOCR bit field selection PCx = 1X11(ALT3)
Column “Type”:
A1 = Pad class A1 (LVTTL)
A1+ = Pad class A1+ (LVTTL)
A2 = Pad class A2 (LVTTL)
B = Pad class B (LVTTL)
F = Pad class F (LVDS/CMOS)
D = Pad class D (ADC)
S = Pad class D (ADC) / Pad class S(SENT)
PU = with pull-up device connected during reset (PORST = 0)
PD = with pull-down device connected during reset (PORST = 0)
TR = tri-state during reset (PORST = 0)
Data Sheet
91
V 1.1, 2014-05