K10P81M100SF2 Datasheet, PDF (8/60 Pages) Freescale Semiconductor, Inc – K10 Sub-Family Data Sheet

Terminology and guidelines
3.6 Relationship between ratings and operating requirements
Operating ^{or handling rating (min.)}
Operating ^{requirement (min.)}
Operating ^{requirement (max.)}
Operating ^{or handling rating (max.)}
Fatal
range
- Probable permanent failure
Limited
operating
range
- No permanent failure
- Possible decreased life
- Possible incorrect operation
Normal
operating
range
- No permanent failure
- Correct operation
Limited
operating
range
- No permanent failure
- Possible decreased life
- Possible incorrect operation
Fatal
range
- Probable permanent failure
Handling range
- No permanent failure
–∞
∞
ry _{3.7 Guidelines for ratings and operating requirements}
a _{Follow these guidelines for ratings and operating requirements:}
in ^{• Never exceed any of the chip’s ratings.}
• During normal operation, don’t exceed any of the chip’s operating requirements.
• If you must exceed an operating requirement at times other than during normal
operation (for example, during power sequencing), limit the duration as much as
lim ^possible.
3.8 Definition: Typical value
e _{A typical value is a specified value for a technical characteristic that:}
r _{• Lies within the range of values specified by the operating behavior}
• Given the typical manufacturing process, is representative of that characteristic
P during operation when you meet the typical-value conditions or other specified
conditions
Typical values are provided as design guidelines and are neither tested nor guaranteed.
3.8.1 Example 1
This is an example of an operating behavior that includes a typical value:
Symbol
I_WP
Description
Min.
Digital I/O weak 10
pullup/pulldown
current
Typ.
70
Max.
130
Unit
µA
K10 Sub-Family Data Sheet Data Sheet, Rev. 1, 11/2010.
8
Preliminary
Freescale Semiconductor, Inc.