MC33596_10 Datasheet, PDF (55/70 Pages) Freescale Semiconductor, Inc – PLL Tuned UHF Receiver for Data Transfer Applications

Electrical Characteristics
19.6 Digital Input: CONFB, MOSI, SCLK, SEB, STROBE,
RSSIC
Operating supply voltage and temperature range see Table 3. Values refer to the circuit recommended in the application
schematic (see Figure 43 through Figure 54), unless otherwise specified. Typical values reflect average measurement at V_CC =
3.0 V, T_A = 25°C.
Parameter
Test Conditions
Comments
Limits
Unit
Min
Typ
Max
7.7 Input low voltage
7.8 Input high voltage
7.9 Input hysteresis
7.10 Input low voltage
7.11 Input high voltage
7.12 Input hysteresis
7.5 Sink current
MOSI, SCLK, SEB, RSSIC⁽¹⁾
—
—
0.4 x V_CC2
V
0.8 x V_CC2
—
—
V
CONFB, STROBE²
0.1 x V_CC2
—
—
—
V
—
0.4 x V_CCDIG2
V
0.8 x V_CCDIG2
—
—
V
0.1 x V_CCDIG2
—
—
V
Configuration, receive, modes
1
—
100
nA
7.6
standby or LVD modes
0.5
—
10
nA
NOTES:
1 _{Input levels of those pins are referenced to VCC2 which depends upon VCC (see Section 5, “Power Supply”).}
2 _{Input levels of those pins are referenced to VCCDIG2 which depends upon the circuit state (see Section 5, “Power Supply”).}
19.7 Digital Output
Operating supply voltage and temperature range see Table 3. Values refer to the circuit recommended in the application
schematic (see Figure 43 through Figure 54), unless otherwise specified. Typical values reflect average measurement at V_CC =
3.0 V, T_A = 25°C.
Parameter
Test Conditions
Comments
Limits
Unit
Min
Typ
Max
8.1 Output low voltage
8.2 Output high voltage
8.3 Fall and rise time
8.4 Output low voltage
8.5 Output high voltage
Digital Output: DATACLK, LVD, MISO, MOSI, SCLK
|_ILOAD| = 50 μA
From 10% to 90% of the
output swing,
C_LOAD = 10pF
—
—
0.8 x V_CCIO
—
—
80
Digital Output: SWITCH (V_CC = 3V)
|_ILOAD| = 50 μA
—
—
0.8 x V_CC
—
0.2 x V_CCIO
V
—
V
150
ns
0.2 x V_CC
V
—
V
MC33596 Data Sheet, Rev. 4
Freescale Semiconductor
55