MC33596_10 Datasheet, PDF (53/70 Pages) Freescale Semiconductor, Inc – PLL Tuned UHF Receiver for Data Transfer Applications

Electrical Characteristics
Operating supply voltage and temperature range see Table 3. Values refer to the circuit recommended in the application
schematics Figure 43 through Figure 54), unless otherwise specified. Typical values reflect average measurement at V_CC = 3.0
V, T_A = 25°C.
Parameter
Test Conditions
Comments
Limits
Unit
Min
Typ
Max
Receiver: Analog and Digital RSSI
3.51 Analog RSSI output signal for Measured on RSSIOUT
Input signal @–108 dBm
3.52 Analog RSSI output signal for
Input signal @–100 dBm
3.53 Analog RSSI output signal for
Input signal @–70 dBm
3.54 Analog RSSI output signal for
Input signal @–28 dBm
3.55 Digital RSSI Registers for Input RSSI [0:3]
signal @–108 dBm
3.56 Digital RSSI Registers for Input
signal @–100 dBm
3.57 Digital RSSI Registers for Input
signal @–70 dBm
3.58 Digital RSSI Registers for Input
signal @–28 dBm
3.59 Digital RSSI Registers for Input RSSI [4:7]
signal @–70 dBm
3.6 Digital RSSI Registers for Input
signal @–50 dBm
3.61 Digital RSSI Registers for Input
signal @–24 dBm
380
—
420
—
850
—
1000
—
0
—
0
—
9
—
13
—
0
—
4
—
13
—
650
mV
700
mV
1200
mV
1300
mV
2
3
13
16
2
8
15
19.4 PLL & Crystal Oscillator
Operating supply voltage and temperature range see Table 3. Values refer to the circuit recommended in the application
schematic (see Figure 43 through Figure 54), unless otherwise specified. Typical values reflect average measurement at
V_CC = 3.0 V, T_A = 25 °C.
Parameter
Test Conditions
Comments
Limits
Unit
Min
Typ
Max
5.9 PLL lock time
RF frequency ±25kHz
—
5.1 Toggle time between 2
frequencies
RF frequency step <1.5MHz,
—
RF frequency ±25kHz
5.10 Crystal oscillator startup time
—
5.8 Crystal series resistance
—
50
100
μs
30
—
μs
0.6
1.2
ms
—
120
Ω
MC33596 Data Sheet, Rev. 4
Freescale Semiconductor
53