MC9S08GB60A Datasheet, PDF (4/302 Pages) Freescale Semiconductor, Inc – HCS08 Microcontrollers

Revision History
To provide the most up-to-date information, the revision of our documents on the World Wide Web will
be the most current. Your printed copy may be an earlier revision. To verify you have the latest information
available, refer to:
http://freescale.com
The following revision history table summarizes changes contained in this document.
Revision
Number
1.00
1.01
1.02
2
Revision
Date
07/14/2005
09/04/2007
02/25/2008
7/30/2008
Description of Changes
Initial public release.
Added a footnote to RTI of Table 3.2; Added RTI description to Section 3.5.6;
Added a sentence "If active BDM mode is enabled in stop3, the internal RTI
clock is not available." to the Section 5.7 Real Time Interrupt.
Changed the Maximun Low Power of FBE and FEE in Table A-9 to 10 MHz.
Changed the Title of Table 13-2 from “IIC1A Register Field Descriptions” to
“IIC1F Register Field Descriptions”
Added 42-pin SDIP information.
Changed “However, when HGO=0, the maximum frequency is 8 MHz in FEE
and FBE modes.” to “However, when HGO=0, the maximum frequency is
10 MHz in FEE and FBE modes.” in Appendix B5.
Updated the “How to reach us” at backpage.
This product incorporates SuperFlash^® technology licensed from SST.
Freescale‚ and the Freescale logo are trademarks of Freescale Semiconductor, Inc.
© Freescale Semiconductor, Inc., 2005-2008. All rights reserved.
MC9S08GB60A Data Sheet, Rev. 2
6
Freescale Semiconductor