MC9S08GB60A Datasheet, PDF (264/302 Pages) Freescale Semiconductor, Inc – HCS08 Microcontrollers

Appendix A Electrical Characteristics
Table A-4. DC Characteristics (Sheet 2 of 3)
(Temperature Range = –40 to 85°C Ambient)
Parameter
Symbol
Min
Typical¹
Low-voltage warning threshold — low range
(V_DD falling)
(V_DD rising)
Power on reset (POR) re-arm voltage⁽²⁾
Mode = stop
Mode = run and Wait
Input high voltage (V_DD > 2.3 V) (all digital inputs)
Input high voltage (1.8 V ≤ V_DD ≤ 2.3 V)
(all digital inputs)
Input low voltage (V_DD > 2.3 V) (all digital inputs)
Input low voltage (1.8 V ≤ V_DD ≤ 2.3 V)
(all digital inputs)
Input hysteresis (all digital inputs)
Input leakage current (per pin)
V_In = V_DD or V_SS, all input only pins
High impedance (off-state) leakage current (per
pin)
V_In = V_DD or V_SS, all input/output
Internal pullup and pulldown resistors³
(all port pins and IRQ)
Internal pulldown resistors (Port A4–A7 and IRQ)
Output high voltage (V_DD ≥ 1.8 V)
I_OH = –2 mA (ports A, B, D, E, and G)
Output high voltage (ports C and F)
I_OH = –10 mA (V_DD ≥ 2.7 V)
I_OH = –6 mA (V_DD ≥ 2.3 V)
I_OH = –3 mA (V_DD ≥ 1.8 V)
Maximum total I_OH for all port pins
Output low voltage (V_DD ≥ 1.8 V)
I_OL = 2.0 mA (ports A, B, D, E, and G)
Output low voltage (ports C and F)
I_OL = 10.0 mA (V_DD ≥ 2.7 V)
I_OL = 6 mA (V_DD ≥ 2.3 V)
I_OL = 3 mA (V_DD ≥ 1.8 V)
Maximum total I_OL for all port pins
V_LVWL
2.08
2.16
2.1
2.19
V_Rearm
V_IH
V_IH
V_IL
V_IL
V_hys
|I_In|
0.20
0.50
0.70 × V_DD
0.85 × V_DD
—
—
0.06 × V_DD
—
0.30
0.80
0.025
|I_OZ|
—
0.025
R_PU
17.5
R_PD
17.5
V_DD – 0.5
V_OH
V_DD – 0.5
|I_OHT|
—
—
V_OL
—
—
—
I_OLT
—
Max
2.2
2.27
0.40
1.2
—
—
0.35 × V_DD
0.30 × V_DD
—
1.0
1.0
52.5
52.5
—
—
—
—
60
0.5
0.5
0.5
0.5
60
Unit
V
V
V
V
V
V
V
μA
μA
kΩ
kΩ
V
mA
V
mA
MC9S08GB60A Data Sheet, Rev. 2
264
Freescale Semiconductor