MC9S08GB60A Datasheet, PDF (268/302 Pages) Freescale Semiconductor, Inc – HCS08 Microcontrollers

Appendix A Electrical Characteristics
Table A-5. Supply Current Characteristics (continued)
Parameter
Symbol V_DD (V)
Typical¹
Max²
Temp. (°C)
LVI adder to stop3
(LVDSE = LVDE = 1)
55
3
70 μA
70
85
55
2
60 μA
70
85
Adder to stop3 for oscillator enabled⁷
(OSCSTEN =1)
55
3
5 μA
70
85
55
2
5 μA
70
85
Adder for loss-of-clock enabled
55
3
9 μA
70
85
1 _{Typicals are measured at 25°C. See Table A-6 through Table A-9 for typical curves across voltage/temperature.}
2 _{Values given here are preliminary estimates prior to completing characterization.}
3 _{All modules except ATD active, ICG configured for FBE, and does not include any dc loads on port pins}
4 _{Values are characterized but not tested on every part.}
5 _{Every unit tested to this parameter. All other values in the Max column are guaranteed by characterization.}
6 _{Most customers are expected to find that auto-wakeup from stop2 or stop3 can be used instead of the higher current wait mode.}
Wait mode typical is 560 μA at 3 V and 422 μA at 2V with f_Bus = 1 MHz.
7 _{Values given under the following conditions: low range operation (RANGE = 0), low power mode (HGO = 0), clock monitor}
disabled (LOCD = 1).
MC9S08GB60A Data Sheet, Rev. 2
268
Freescale Semiconductor