M-G362 Datasheet, PDF (14/69 Pages) Epson Company – IMU (Inertial Measurement Unit)

3.2 Socket Dimensions
Figure 3.4 and Table 3.1 describes the connector manufacturer and the model number of the socket
built into the IMU.
Figure 3.4 Socket Pin Dimensions
Table 3.1 Socket Part Number
Maker
Parts Number
RoHS Compliant
Panasonic
AXE524124
Yes
Table 3.2 shows the connector manufacturer and the model number of the recommended header used
at the host side.
Table 3.2 Header Part Number
Maker
Parts Number
RoHS Compliant
Panasonic
AXE624224
Yes
Use M1.6 (P 0.35mm) pan head screws to fix the header part of the connector harness to the socket of
the IMU. Select the length of the screws so that the length of engagement under the surface of the IMU
is 3±0.5mm.
Note: The IMU connector rating for insertion and removal is a maximum of 20 times.
10
Seiko Epson Corporation
M-G362PDC1 Data Sheet
Rev.20131217