ATMEGA8_08 Datasheet, PDF (204/308 Pages) ATMEL Corporation – 8-bit with 8K Bytes In-System Programmable Flash

• Gain error: After adjusting for offset, the gain error is found as the deviation of the last
transition (0x3FE to 0x3FF) compared to the ideal transition (at 1.5 LSB below maximum).
Ideal value: 0 LSB
Figure 98. Gain Error
Output Code
Gain
Error
Ideal ADC
Actual ADC
V_REF Input Voltage
• Integral Non-linearity (INL): After adjusting for offset and gain error, the INL is the maximum
deviation of an actual transition compared to an ideal transition for any code. Ideal value: 0
LSB.
Figure 99. Integral Non-linearity (INL)
Output Code
Ideal ADC
Actual ADC
V_REF Input Voltage
• Differential Non-linearity (DNL): The maximum deviation of the actual code width (the
interval between two adjacent transitions) from the ideal code width (1 LSB). Ideal value: 0
LSB.
204 ATmega8(L)
2486T–AVR–05/08