ATMEGA8_08 Datasheet, PDF (144/308 Pages) ATMEL Corporation – 8-bit with 8K Bytes In-System Programmable Flash

Receiving Frames with
9 Data Bits
If 9-bit characters are used (UCSZ=7) the ninth bit must be read from the RXB8 bit in UCSRB
before reading the low bits from the UDR. This rule applies to the FE, DOR and PE Status Flags
as well. Read status from UCSRA, then data from UDR. Reading the UDR I/O location will
change the state of the receive buffer FIFO and consequently the TXB8, FE, DOR, and PE bits,
which all are stored in the FIFO, will change.
144 ATmega8(L)
2486T–AVR–05/08